ace the trim with something to match the floors Then do it first. Don’t use too much pressure as it could cause damage to the drywall.
Clean the Pad and Carpet
Rather than taking the carpet out from one piece, you can cut the carpet into smaller pieces. This makes it easier to remove the carpet quickly, especially in the corners in which the tracks are.
Beginning with the pad when the carpet is gone. These are attached with staples. This means that there may there be patches left which require removal of pliers that are diagonal.
Vapor Barrier
After the subfloor has been cleaned, you can use the Vapor Barrier. This is a product that stops water from getting into hardwood flooring.
Get rid of flooring from boxes
Take the flooring out of the boxes. Mix the tiles in a way that there’s no distinction in the color of the tiles after installation. Give them time to adjust to the space you have.
Floor Installation
Measure one-half inch around the corner, and mark a line in chalk. There is a little room left when it expands. After that, verify if the flooring is level. In order to make your floor level then you should install asphalt roofing shingles under the hardwood. x1wwcu21sq.